Press the F10 key to exit the BIOS setup utility. In the configuration confirmation dialog, press ENTER to save the changes and exit the menu.
How do I get out of utility mode in BIOS?
weaving
19 Sep 2019.
Why can’t I exit BIOS?
If you are unable to exit BIOS on your PC, the problem is most likely related to your BIOS settings. …Enter the BIOS, go to the security options and disable Secure Boot. Now save the changes and restart your PC. Enter the BIOS again and this time go to the boot section.
How do I disable the UEFI Setup Utility?
The Fn keys can be used to send commands to the UEFI (BIOS). Try pressing F1 and see if that brings up a list of commands associated with Fn. Find “Exit without saving changes” and press that Fn key. This should take you out of UEFI and force a reboot.
How do I save and exit BIOS?
Press the key to open the general help screen. F4 With the key you can save changes made and exit the BIOS setup. Press the button to save your changes. Press the button to save the configuration and exit.
What is a BIOS utility?
The BIOS setup utility provides system information and can be used to configure server BIOS settings. The BIOS has a configuration utility stored in BIOS flash memory. Configured data is provided with context-sensitive help and is stored in the system’s battery-backed CMOS RAM.
How to reinstall Windows 10 from BIOS?
Save your settings, restart your computer and you should now be able to install Windows 10.
1 month. 2017 .
How to fix a stuck BIOS?
What to do if PC stuck in BIOS screen?
How to fix BIOS boot loop?
Disconnect the power cord from the power supply. Press the power button for 20 seconds. Remove the CMOS battery, wait 5 minutes and reinsert the CMOS battery. Make sure you only connect the hard drive that Windows was installed on…if you installed Windows on your PC with only one hard drive.
How do I reset my BIOS to default?
Resetting the BIOS to default settings (BIOS)
How do I get out of UEFI boot mode?
How do I disable UEFI Secure Boot?
How are the BIOS settings adjusted?
How to configure the BIOS using the BIOS Setup Utility
What is the UEFI Setup Utility?
UEFI is essentially a small operating system that runs on PC firmware, and it can do so much more than BIOS. It can be stored in flash memory on the motherboard or loaded at boot from a hard drive or network share.
How do I back up my BIOS?
To save the changes, find the Save and Reset Changes option on the Save and Exit screen. This option saves your changes and then resets your computer. There is also an option to discard changes and exit. This is in case you make a mistake or decide you don’t want to change your BIOS settings at all.
How do I boot into the BIOS?
To access your BIOS, you must press a key during the boot process. This key is often displayed during the boot process with a message “Press F2 to enter BIOS”, “Press to enter setup” or something similar. Common keys you may need to press are Delete, F1, F2, and Esc.
Why does my PC keep going into the BIOS?
If your computer keeps booting into BIOS, the problem might be caused by an incorrect boot order. …if you find it, set the hard drive as the primary boot option. If your hard drive listed under Boot Device cannot be found in the BIOS, change that hard drive. Check if the drive is connected properly and can work on another PC.